301104+901102 - NMO Mount Dual-Band (800/1900 MHz) 12" Antenna by WILSON (10 to 15 dB Gain) - WITH 3/4" NMO MOUNT
Product Description
WILSON - NMO Mount Dual-Band (800/1900 MHz) 12" Antenna - 301104/ DB819 / 301-4 / 901102 / 301-6 - Includes 3/4" NMO Mount with 14 feet of low loss foam cable
The Wilson Dual-Band Cellular Antenna (DB819) is the most advanced cellular antenna of its kind. Few things are as frustrating or dangerous as trying to reconnect a dropped call while driving. The DB819 dramatically reduces or completely eliminates cellphone disconnections and noise. Inside of an automobile a phone with the DB819 can transmit and receive over ten times the signal of a phone without one.
In addition to dropout and noise reduction, the DB819 eliminates microwave energy radiating into the head. This is achieved by channeling all of the energy out through the external antenna.
Significantly Increases Your Cellphone's Range on Send & Receive
Helps Eliminate the Dreaded "Dead Zones"
Transfers All Microwave Energy from Your Cellphone to the Outside Antenna
Eliminates All Microwave Energy Radiating into the Head
No Power Required
Works on all Cellphones with compatible adapter (800 & 1900 MHz - Analog & Digital)
See
the Magnet Mount Test Results
Installation Instructions
1. Select a location for mounting the antenna. The best location would be centered on the roof, although other locations are acceptable.
2. For the 3/4" NMO mount, drill a 3/4" hole in the selected location.
3. Route the cable between hole and phone location.
4. Place the NMO mount up through the bottom of the hole.
5. Place 3/4" threaded nut on the top of the mount, outside of vehicle, and tighten.
6. Screw antenna coil into place.
$37.95 GETS YOU THE BEST ANTENNA MADE WITH 3/4" MOUNT!
The Wilson Dual-Band Cellular Antenna (DB819) is the most advanced cellular antenna of its kind. Few things are as frustrating or dangerous as trying to reconnect a dropped call while driving. The DB819 dramatically reduces or completely eliminates cellphone disconnections and noise. Inside of an automobile a phone with the DB819 can transmit and receive over ten times the signal of a phone without one.
In addition to dropout and noise reduction, the DB819 eliminates microwave energy radiating into the head. This is achieved by channeling all of the energy out through the external antenna.
Installation Instructions
1. Select a location for mounting the antenna. The best location would be centered on the roof, although other locations are acceptable.
2. For the 3/4" NMO mount, drill a 3/4" hole in the selected location.
3. Route the cable between hole and phone location.
4. Place the NMO mount up through the bottom of the hole.
5. Place 3/4" threaded nut on the top of the mount, outside of vehicle, and tighten.
6. Screw antenna coil into place.
$37.95 GETS YOU THE BEST ANTENNA MADE WITH 3/4" MOUNT!
